- Tension gauge for braided line
- Hauling a 1989 Bayfield 25
- Hauling a 1989 Bayfield 25
- I need advise on a stable sailboat
- New project need help.
- Islander sailboats any good?
- Dudley Dix "Hout Bay 30"
- Deck vs. keel stepped mast on HR 34
- Dynex Dux pull test- preliminary results
- Have a new boat project
- Pointing ability: hull vs rig
- Ever heard of a "Hooks" sailboat?
- free 16' hydrofoil inspired craft
- Sidewinder sailboat 16 rudder and sail
- Simple prediction of any sailboat speed at given wind; VMG has been added
- can anyone tell me what this boat is modeled after
- Mainsail sheeting design without a track.
- Sailing boat speed Vs. wind speed formula
- "My" open 70's
- Propeler ice protection
- 14.5' overnight camper
- Advice On The First 47.7 Good Or Bad
- Nelp needed with boat ID
- identify this boat.
- Parts for Meissner winches
- Tacking Downwind (faster than the wind)
- mast too small ?
- vertical down forces on stepped mast Please HELP
- the "big challenge"
- Higher mounted/longer boom.
- Northwest 18
- Aluminium Tiller
- clipper project design help
- Retractable propeller
- BowSprit
- Parachute Anchors?
- VOR 70 Daggerboard Sections
- Fractional rig sails
- Tendency to broach during beat or close reach
- THEOREM Of SKIFFs
- most seaworthy trailer sailboat?
- Need small sailboat plans with CAD files
- sail for salmon troller
- The Articulated Sailboat
- Where to get started
- New Cabrillo Skiff Design for Kids
- Merit 22 Deck Core Replacement: Advice Needed
- Sailing Kayak Project
- 24' cruising sailboats- how far is the cabin sole below the waterline?
- Possible to convert from Bermudan to Gaff? Rigging question...
- Tabu
- Old Quarter Tonners -Magic Bus
- North West Marine Designs
- 52.86
- 50.26
- Volvo ocean race yacht designers
- Foiler Wand Animation
- boatbuilders
- Fitting out a budget trailer-sailer or pocket-cruiser
- Square Sail on a Skerry?
- shroud and spreader placement
- ALternate sail plans?
- Electronic Foil Control
- Yacht "Swift"
- Kiteboard, no foils, 50.1 knots (57.6 mph)
- The Ideal 18ft Daysailer
- Cold-molding over planking
- IRC Ratings
- Foil section at low Reynolds numbers.
- Safest way to get from NZ to Perth?
- Please identify this boat
- center of effort in multiple headsails
- Sailboat bulkhead layout & deck design
- Name that Classic Plastic
- island girls
- Inflatable wing sail ?
- Must Have Silicone Based Lubricant/Water Repellent
- linen as a sail material.
- Has anyone heard of Davis-McCandless?
- Synthetic rigging properties?
- Building
- Schooner sail plan - need help
- alloy mast for catrig
- really interesting free design
- 16-17' Fixed Keel Self-Righting Foiler
- sail/cargo ship old/new
- Airfoil selection for a foiler ?
- Trim tab keel, why not?
- Trailer or Transport
- Mid Boom Sheeting - need help with attachment points
- Puma 23
- laser class
- Where to buy Hartley 16 Plans?
- Need Advise - with leak around rudder post
- Non rectangular sterns for non planning boats
- Information for Par.
- Van der Stadt Randmeer / Trotter / Trotter-Pandora
- Rudder rake as it relates to mast rake and trim.
- BIGGEST trailable yacht
- Cheap Sails!
- What if I had a system to right cats !?
- how tight is tight in mainsail
- Help- Fiberglass Foul Up!
- Foam Foils Layup
- Hiring a Yacht Designer...
- Decision time --- build or buy
- Sprays
- Trailerable sportboat weekender?
- Masthead taper
- Please crush my sailboat dreams with tales of limitations
- Any plans for Folkboats available online?
- taking video clips on laser sailing
- Newbie interested in sailboats
- Nord Cantieri Koala
- catfish beach crusier or nancy's china?
- Fair out a square transom
- epoxies and the dreaded bysphenol-A
- Water ballast sail-boat?
- New Dory Rig: Lug-Yawl
- Leeboard lead
- Porpoise Ketch performance
- Carlson 'Vector Major'
- blades on Hugo Boss race boat
- Self tacking jib
- Cat rigging?
- Hanse 630 or Hanse 540 for solo circumnavigation
- Mainsail sheeting
- s.w.a.t.h. kiteboat - is this possible?
- Handicapped boater
- Bram Dally retires.
- Motor height for non planing Mac 26X
- Can you identify this design ??
- Trifle Class Sailing Dinghy
- Pointy or square stern?
- Staysail Rigging
- macgregor 65
- Mast Loading
- Foiling 18 II
- Reading Hull shapes
- Speed Sailing Gets A Shot of Sanity
- The process of rig design?
- Olympic Sailing Course - How does this sort of thing happen?
- Strange Rig
- Not happy - gonna take me boat and go!!!
- Polar Diagram Cal 40
- Anhcor systems
- picture of 1986 hunter 31
- Strange double finn
- More Foils in Your Future?
- spearder on a mast
- Design to avoid Broaching
- parametric design
- Veneer Sheath
- Any books on small boat design ?
- need help with mast
- singlehanded fast cruiser design, build
- To skeg or not to skeg that is the question
- Gem 550
- riging conversion
- Autonomous sailboat
- Is there validity to the notion that a pointy stern, a canoe stern, is safer at sea
- resistance of a skiff
- Longitudinal stringers...
- Looking for CCA type above deck, modern below, design, cold molded bld.
- Peoples Foiler? New GLASS Bladerider!
- 26X Mac set-up using 4 Rudders
- Heat Exchang
- Please Help me identify this boat!
- Sailboat Restoration in RSA
- Mirabaud-Super Foiler!
- Restoring a wooden sailboat.
- Maths model of Laser
- Rower/Sailer for Catalina for 2 men
- A sailing ring for a canoe.
- Anyone familiar with Argentinian designs??
- small offshore yacht design
- Planing Hull forms
- Winglets on sails?
- Boatspeed 23s - where are they now?
- Sheeted outside, oiled inside. Good idea?
- 13' sailboat ballast in need of repair.
- a canter,not
- new F22 mast
- rerigging columbia 29
- VPP again
- Dreaming up a light air dinghy
- IOR Ton Rule
- Facet Boat
- Strip planked boats and saildrives?
- deck stepped mast; design question
- Hoyt Offset Squarehead Rig
- pocket luff sails with a trapeze?
- New Swiss Foiling Machine
- 4 Meter mono foiler project
- In need of some help, fiberglass sailboat
- effects of bieng overloaded
- wing masts and the like on skiffs?
- are teak and marine plywood a must???
- junk lateen yawl ?
- Speedboat
- new project, a little help please!
- Extending bow sprit?
- Davidson 52 look around
- cheaper alternative to Pogo 10.50?
- a little advise please
- Packable Sailing Boat
- Islander 32 1967 Model - Need Information
- Project Autonomous Robot
- Our Boat Made It Into A Book!
- Sheet Stretch
- Seaworthiness of a '70s Seafarer 38
- A most cleverly named tender [picture]
- New day-yacht by Alphena Yachts
- Keel hung rudders?
- Small fast-built sailboat: Bolger Junebug, Storer GIS, or ???
- Miller and whitworth 32
- Sail Forces...need help.
- Looking for Kick-Up rudder idea/designs.
- Tahiti in twenty days ?
- Cabin Sole as a structural member?
- Searching for info. International 23'
- Blister Repair Options
- water in bilge - fact of life on keel stepped mast?
- Aluminum and carbon mast! Possible?
- chain plates
- Someone mind checking my work?
- Alekstar A-38 Express Cruiser
- Offshore ability of sharpie design?
- design critique- a 37' cat-ketch sharpie/dory (pictures)
- How do you design for the perfect trim?
- golden V'S club shamrock
- '60s Columbia 40
- GRP 37ft - strong enough for true offshore passages?
- mast placment
- Transition sails from Richard Dryden
- Another Big Keelboat(NOT a canter) loses its Rig
- How large can you home-build a free-standing mast?
- a few questions
- Article on Reichel-Pugh Yacht Design
- Self-steering concerns- multihull vs monohull
- Seeking information on Bryan Lello offshore designs
- Megayacht Legacy finally free
- Frontal area resisantance vs. Wetted surface
- Riley Hardware
- Mast Compression Loads
- Stern cabin - too odd on small boats?
- Odd composite mast step.....
- surface finnish
- Carbonfibre keel/rudder?
- What is the best exhaust location on a CCA type sailboat?